JST Connectors: Difference between revisions
From YourSpec Automotive Wiring Wiki
Created page with "'''JST Connectors''' refers to a family of electrical connectors made by the Japanese company JST." |
No edit summary |
||
| Line 1: | Line 1: | ||
'''JST Connectors''' refers to a family of electrical connectors made by the Japanese company JST. | '''JST Connectors''' refers to a family of electrical connectors made by the Japanese company [[JST]]. | ||
JST Connectors in their most-recognizable form are white plastic connector housings and headers on PCBs. | |||
JST Connectors are usually described using the series, pin-to-pin pitch, wire count and gender. For example, a 3 pin female JST XH connector would be described as: | |||
* JST XH 2.5mm 3-pin female | |||
=== Wire-to-board connectors: === | |||
{| class="wikitable sortable" | |||
!Image | |||
!JST series | |||
!Pin-to-pin pitch | |||
!Pin rows | |||
!Current | |||
(Amp) | |||
!Voltage | |||
(Volt) | |||
!Wire size | |||
(AWG) | |||
!Shroud | |||
!Lock | |||
!Notes | |||
!Datasheet | |||
|- | |||
| | |||
|VH | |||
|3.96 mm (0.156 in) | |||
|1 | |||
|10 | |||
|250 | |||
|22 to 16 | |||
|Yes/No | |||
|Yes | |||
|Unshrouded seems to be more popular than shrouded. | |||
|[http://www.jst-mfg.com/product/pdf/eng/eVH.pdf JST VH] | |||
|- | |||
| | |||
|RE | |||
|2.54 mm (0.100 in) | |||
|1 | |||
|2 | |||
|250 | |||
|30 to 24 | |||
|No | |||
|No | |||
|Similar to female "DuPont" connectors and male pin headers. RF series is double row. | |||
|[http://www.jst-mfg.com/product/pdf/eng/eRE.pdf JST RE] | |||
|- | |||
| | |||
|EH | |||
|2.50 mm (0.098 in) | |||
|1 | |||
|3 | |||
|250 | |||
|32 to 22 | |||
|Yes | |||
|No | |||
|Not 0.1-inch pitch. | |||
|[http://www.jst-mfg.com/product/pdf/eng/eEH.pdf JST EH] | |||
|- | |||
| | |||
|XA | |||
|2.50 mm (0.098 in) | |||
|1 | |||
|3 | |||
|250 | |||
|30 to 20 | |||
|Yes | |||
|Yes | |||
|Not 0.1-inch pitch. | |||
|[https://www.jst-mfg.com/product/pdf/eng/eXA-WB.pdf JST XA] | |||
|- | |||
| | |||
|XH | |||
|2.50 mm (0.098 in) | |||
|1 | |||
|3 | |||
|250 | |||
|30 to 22 | |||
|Yes | |||
|Yes | |||
|Not 0.1-inch pitch. Used by many radio control (R/C) batteries. | |||
|[http://www.jst-mfg.com/product/pdf/eng/eXH.pdf JST XH] | |||
|- | |||
| | |||
|PA | |||
|2.00 mm (0.079 in) | |||
|1 | |||
|3 | |||
|250 | |||
|28 to 22 | |||
|Yes | |||
|Yes | |||
|Used by FMA Cellpro R/C battery chargers. | |||
|[http://www.jst-mfg.com/product/pdf/eng/ePA-F.pdf JST PA] | |||
|- | |||
| | |||
|PH | |||
|2.00 mm (0.079 in) | |||
|1 | |||
|2 | |||
|100 | |||
|32 to 24 | |||
|Yes | |||
|No | |||
|Many stepper motors. Compatible with KR (IDC), KRD (IDC), CR (IDC) series. | |||
|[http://www.jst-mfg.com/product/pdf/eng/ePH.pdf JST PH] | |||
|- | |||
| | |||
|ZH | |||
|1.50 mm (0.059 in) | |||
|1 | |||
|1 | |||
|50 | |||
|32 to 26 | |||
|Yes | |||
|No | |||
|Compatible with ZR (IDC) and ZM (crimp) series. | |||
|[http://www.jst-mfg.com/product/pdf/eng/eZH.pdf JST ZH] | |||
|- | |||
| | |||
|GH | |||
|1.25 mm (0.049 in) | |||
|1 | |||
|1 | |||
|50 | |||
|30 to 26 | |||
|Yes | |||
|Yes | |||
|Not 0.05-inch pitch. Sometimes confused with Molex PicoBlade. | |||
|[http://www.jst-mfg.com/product/pdf/eng/eGH.pdf JST GH] | |||
|- | |||
| | |||
|GHD | |||
|1.25 mm (0.049 in) | |||
|2 | |||
|1.25 | |||
|50 | |||
|30 to 26 | |||
|Yes | |||
|Yes | |||
|Not 0.05-inch pitch. Double row type connector. | |||
|[https://www.jst-mfg.com/product/pdf/eng/eGHD-SN.pdf JST GHD] | |||
|- | |||
| | |||
|SH | |||
|1.00 mm (0.039 in) | |||
|1 | |||
|1 | |||
|50 | |||
|32 to 28 | |||
|Yes | |||
|No | |||
|Compatible with SR (IDC) and SZ (IDC) series. | |||
|[http://www.jst-mfg.com/product/pdf/eng/eSH.pdf JST SH] | |||
|- | |||
| | |||
|SHD | |||
|1.00 mm (0.039 in) | |||
|2 | |||
|1 | |||
|50 | |||
|32 to 28 | |||
|Yes | |||
|No | |||
|Double row type connector. | |||
|[https://www.jst-mfg.com/product/pdf/eng/eSHD.pdf JST SHD] | |||
|- | |||
| | |||
|NSH | |||
|1.00 mm (0.039 in) | |||
|1 | |||
|1 | |||
|50 | |||
|32 to 28 | |||
|Yes | |||
|Yes | |||
|Lock type connector. | |||
|[https://www.jst-mfg.com/product/pdf/eng/eNSH.pdf JST NSH] | |||
|- | |||
| | |||
|NSHD | |||
|1.00 mm (0.039 in) | |||
|2 | |||
|1 | |||
|50 | |||
|32 to 28 | |||
|Yes | |||
|Yes | |||
|Double row lock type connector. | |||
|[https://www.jst-mfg.com/product/pdf/eng/eNSHD.pdf JST NSHD] | |||
|} | |||
=== Wire-to-wire connectors: === | |||
{| class="wikitable sortable mw-collapsible" | |||
!Image | |||
!JST series | |||
!Pin-to-pin pitch | |||
!Pin rows | |||
!Current | |||
(Amp) | |||
!Voltage | |||
(Volt) | |||
!Wire size | |||
(AWG) | |||
!Features | |||
!Notes | |||
!Datasheet | |||
|- | |||
| | |||
|RCY | |||
|2.50 mm (0.098 in) | |||
|1 | |||
|3 | |||
|250 | |||
|28 to 22 | |||
|Locking | |||
|Used in radio control (R/C), also known as BEC or P connector. Commonly found on small models, toys, and small LiPo packs. | |||
|[http://www.jst-mfg.com/product/pdf/eng/eRCY.pdf JST RCY] | |||
|- | |||
| | |||
|SM | |||
|2.50 mm (0.098 in) | |||
|1 | |||
|3 | |||
|250 | |||
|28 to 22 | |||
|Locking, High force | |||
|Commonly used in LED lighting, appliances, and electric bikes and scooters. | |||
|JST SM | |||
|} | |||
[[Category:Connectors]] | |||
Revision as of 13:12, 5 December 2025
JST Connectors refers to a family of electrical connectors made by the Japanese company JST.
JST Connectors in their most-recognizable form are white plastic connector housings and headers on PCBs.
JST Connectors are usually described using the series, pin-to-pin pitch, wire count and gender. For example, a 3 pin female JST XH connector would be described as:
- JST XH 2.5mm 3-pin female
Wire-to-board connectors:
| Image | JST series | Pin-to-pin pitch | Pin rows | Current
(Amp) |
Voltage
(Volt) |
Wire size
(AWG) |
Shroud | Lock | Notes | Datasheet |
|---|---|---|---|---|---|---|---|---|---|---|
| VH | 3.96 mm (0.156 in) | 1 | 10 | 250 | 22 to 16 | Yes/No | Yes | Unshrouded seems to be more popular than shrouded. | JST VH | |
| RE | 2.54 mm (0.100 in) | 1 | 2 | 250 | 30 to 24 | No | No | Similar to female "DuPont" connectors and male pin headers. RF series is double row. | JST RE | |
| EH | 2.50 mm (0.098 in) | 1 | 3 | 250 | 32 to 22 | Yes | No | Not 0.1-inch pitch. | JST EH | |
| XA | 2.50 mm (0.098 in) | 1 | 3 | 250 | 30 to 20 | Yes | Yes | Not 0.1-inch pitch. | JST XA | |
| XH | 2.50 mm (0.098 in) | 1 | 3 | 250 | 30 to 22 | Yes | Yes | Not 0.1-inch pitch. Used by many radio control (R/C) batteries. | JST XH | |
| PA | 2.00 mm (0.079 in) | 1 | 3 | 250 | 28 to 22 | Yes | Yes | Used by FMA Cellpro R/C battery chargers. | JST PA | |
| PH | 2.00 mm (0.079 in) | 1 | 2 | 100 | 32 to 24 | Yes | No | Many stepper motors. Compatible with KR (IDC), KRD (IDC), CR (IDC) series. | JST PH | |
| ZH | 1.50 mm (0.059 in) | 1 | 1 | 50 | 32 to 26 | Yes | No | Compatible with ZR (IDC) and ZM (crimp) series. | JST ZH | |
| GH | 1.25 mm (0.049 in) | 1 | 1 | 50 | 30 to 26 | Yes | Yes | Not 0.05-inch pitch. Sometimes confused with Molex PicoBlade. | JST GH | |
| GHD | 1.25 mm (0.049 in) | 2 | 1.25 | 50 | 30 to 26 | Yes | Yes | Not 0.05-inch pitch. Double row type connector. | JST GHD | |
| SH | 1.00 mm (0.039 in) | 1 | 1 | 50 | 32 to 28 | Yes | No | Compatible with SR (IDC) and SZ (IDC) series. | JST SH | |
| SHD | 1.00 mm (0.039 in) | 2 | 1 | 50 | 32 to 28 | Yes | No | Double row type connector. | JST SHD | |
| NSH | 1.00 mm (0.039 in) | 1 | 1 | 50 | 32 to 28 | Yes | Yes | Lock type connector. | JST NSH | |
| NSHD | 1.00 mm (0.039 in) | 2 | 1 | 50 | 32 to 28 | Yes | Yes | Double row lock type connector. | JST NSHD |
Wire-to-wire connectors:
| Image | JST series | Pin-to-pin pitch | Pin rows | Current
(Amp) |
Voltage
(Volt) |
Wire size
(AWG) |
Features | Notes | Datasheet |
|---|---|---|---|---|---|---|---|---|---|
| RCY | 2.50 mm (0.098 in) | 1 | 3 | 250 | 28 to 22 | Locking | Used in radio control (R/C), also known as BEC or P connector. Commonly found on small models, toys, and small LiPo packs. | JST RCY | |
| SM | 2.50 mm (0.098 in) | 1 | 3 | 250 | 28 to 22 | Locking, High force | Commonly used in LED lighting, appliances, and electric bikes and scooters. | JST SM |